Above screen shots were with a Flex-1500 set at 2 watts
THIS SETUP WILL RUN FLEX1500 & FLEX 3000 FOR JT9-1
SET VIRTUAL COM PORTS TO SCREEN SHOT
POWER SDR SETUP
For logging you have to go into EQSL and manually setup the info also supports JT9
as does QTH.Com logging
Also if you use HRD the HRD Log program ,you can setup to accept JT9 as a mode
You must go into the log program
click on tools at the top
click on modes add JT9 at the bottom tick ok
This a low power mode try a few watts and see how you do !!
Have made contacts all over the world on this mode.