Microphone Audio IC-7100
Audio can be confusing before you try any of these setting you need a pair of Head Phones
to do following setup.
The control unit in the back are two jacks
behind the big tuning knob, in the back labeled phone/ speaker this
is the one you'll be using check picture
Download the Icom IC-7100 Advance Manual
go to page 116.
(note) when you have the advance manual
loaded to find something in the manual hold the control key and the "F" key now
look on lower left corner of your screen type a word in there and see what
With you heads phones plug in and all
other radio off your ready to adjust the audio. You find that there
is audio setting for the different modes we are only interested in the
transmitted audio, for SSB, AM, FM, AND DSTAR.
THIS WILL WORK IN CONJUNCTIONS WITH
MIC/POWER BUTTON FROM CONTROL HEAD BUTTONS.
1. TOUCH SET BUTTON
2. GO UP AND DOWN MENU SELECT
3.AT TOP OF THE SCREEN TOUCH MONITOR
SO IT READS ON
4.TALK INTO THE MIC AND ADJUST
MONITOR LEVEL MINE IS
SET TO 24%
5. TOUCH RETURN KEY BOTTOM OF SCREEN
6. TOUCH TONE CONTROL
7. TOUCH TX
8. PICK BAND
9. IF IN SSB ADJ TRW NAR MINE IS SET
10. TOUCH RETURN KEY
11. CHOSE FM MODE TOUCH SCREEN
12. YOU HAVE A CHOICE OF BASS OR TREBLE ,
I HAVE MINE SET TO +4 BASS AND TREBLE ST TO +3 YOUR SETTING WILL PROBABLY BE
13. WHEN DONE TOUCH RETURN ENJOY
14. Added on OCT.
16, 2014 Main touch screen use FIL1 this FM wide Setting, this info can be found
in the Advance Manual chapter 5 page 6.
73 JIM W4WWJ