HOUSE AND STATION GROUNDING
THIS IS A YOUTUBE VIDEO ABOUT 1 HOUR LONG
HamRadioNow Episode 15
ABOUT 19:40 MINUTES INTO THE PROGRAM
THIS WHAT I HAD WHEN I STARTED TO IMPROVED THE GROUND SYSYTEM, THE GROUND
ROD SEEMS LOOSE WHAT I FOUND AND ROD THAT WAS ONLY 2 FOOT INTO THE GROUND
Info on the copper brackets and other copper grounding item
Copper Grounding items by KF7P
This is my station grounding system
Picture below Right side lower bolt is the 1 inch ground copper braid running
20 foot to the house/trailer fuse box.
At bottom of the 10 foot copper rod is a another ground that runs about 10
foot to another ground to the station. The station ground rod also has the 220
alpha Delta surge protector installed there.
The upper right is 3000 watt surge protector for HF antenna , this is special
order for use with remote switch box, all HF antennas have 2 turns of coax
where they hook up to the Ameritron lighting protect switch box.
Left side is the sure for 2 meter 440 beam this is rated a only 200 watts.
site is not associated with
Disclaimer: This site is not intended to instruct or teach anyone in proper or
safe methods of working on or maintaining YOUR RADIO'S and the author
takes no responsibility for the use of the information contained herein. for
site is not associated with Yaesu USA or
Flex a registered trademark . Other product and company names mentioned herein maybe
the trademarks of their respective owners. Any usage or adaptation of any or all
of the information provided here or on any or all of my web pages is purely at
your own risk. You must take into account your own circumstances and radio
requirements when attempting to utilize any or all of the information provided
on any or all of my web pages