I Bricked my Jumbo Spot

 

Here is how I fixed it

  

     1. with you pistar and you jumbo spot go to configuration

     2.  next click on EXPERT

     3.  click on SSH ACCESS

     4. if all worked right you should see a black saying login

     5. type pi-star hit enter then type raspberry you won't see

         the word  raspberry just hit enter

    6.  you see a command line

    7.  type rpi-rw hit enter

    8.  type this sudo pistar-mmdvmshatflash

    9. now type this sudo pistar-mmdvmshatflash hs_hat

   10. if all worked correct hit enter

   11. when done hit any key then reboot your system

   12. go back to step 1. through 7 and repeat these

   13. now type sudo pistar-update this will take awhile

   14.  reboot again

   15. now go to configuration  hit enter

   16. now do a update and then reboot

YOU ARE NOW DONE HOPE THIS WORKS FOR YOY

JIM W4WWJ

 

 

 

back.gif - (25K)