Gas Filler Neck Modification

For years I had gas fumes in trunk and around back of car. Plus you all know you can't fill car but one way very slow . I clean out the vent tube also found a small rust hole in the vent tube above inside of the fender . Repaired that by cutting out rusted piece and using a piece of gas hose with clamps. I did get rid of the gas fumes but!  Still can't fill it up very fast. Problem solved thanks to AMC Eagle 1984 filler neck. it has check valve init plus a bracket made on it to attach to the trunk support . I cut off about 5 inches of tube , made a bracket from some scrap metal I had. Can fill at high speed and no one can take my gas !!

   this third photo is someone else's car

Disclaimer: This site is not intended to instruct or teach anyone in proper or safe methods of working on or maintaining a car and the author takes no responsibility for the use of the information contained herein. This site is not associated with Ford Motor Company. Falcon is a registered trademark of Ford Motor Company. Other product and company names mentioned herein maybe the trademarks of their respective owners. Any usage or adaptation of any or all of the information provided here or on any or all of my web pages is purely at your own risk. You must take into account your own circumstances and vehicle requirements when attempting to utilize any or all of the information provided on any or all of my web pages. I assume no liability or responsibility for any results, damage, or unforeseen circumstances related in any way to the usage or adaptation of any or all of the aforementioned information. I made these modifications at my own risk and peril. I can't make any promises that your results will be similar. To protect yourself, learn all that you can about this swap from the various sources available. Don't attempt this swap unless you understand completely what it entails and what you must have and do to accomplish a safe installation. Enjoy Jim